product name

Troy-Bilt 5611 Junior IV OPC (4HP) (S/N M0075090-M0100969) Junior

Model: 511981

Back To Assemblies

Save
 Part Not Listed?Part Not Listed?
product name

ENGINE, PULLEYS & BELT

...
...
1
BRKT-ENG LT P4 MTD-20754
...
2
BRKT-ENG RT PNT MTD-20755
...
3
Belts/Pulleys Guard MTD-786-04080-0638
...
4
SCR-HHC 5/16-18X.75 GR 5 ZP MTD-9703
...
5
WASHER-LK .312 ZP MTD-9912
...
6
SCR-HH 5/16-18X1.5 G5 ZP MTD-9758
...
7
NUT-HEX 5/16-18 ZP MTD-9801
...
8
SCR-HH SEMS 10-32 X .5 ZP (SEMS- W/PERM WSHR) MTD-9768
...
9
ENGINE TECUMSEH, STANDARD RECOIL START WITH ELEC SOLID STATE IGNITION, 4HP, MODEL HS40, TYPE 55580K. MTD-NA
...
9
ENGINE TECUMSEH, ELEC START WITH ELEC SOLID STATE IGNITION, 4HP, MODEL HS40, TYPE= 55581K. MTD-NA
...
10
BELT-V (SEE V-BELT SET BELOW) MTD-9095
...
11
PULLEY-REVERSE (ENG DRIVEN, 1 GROOVE, 1 BELT) NOTE: ON EARLIER MODEL TILLERS EQUIPPED WITH A 3 1/2 HP ENGINE, THIS PULLEY IS INSTALLED WITH ITS HUB FACING TOWARD ENGINE. MTD-50210
...
12
SCR-SS 1/4-20 X .25 (SECUR REV ENG PULLEY) MTD-9561
...
13
KEY-WOODRUFF #5 MTD-9361
...
14
BELT-V, FWD SMFRAME (SEE V-BELT SET BELOW) MTD-20565
...
15
PULLEY-FOWARD (ENG DRIVEN, 1 GROOVE, 1 BELT) MTD-20765
...
16
SCR-HH 3/8-24X1.0 G5 ZP (ATTACH FORW PULLEY) MTD-9549
...
17
WASHER-.994X.413X.145 CONCAVE SURFACE FACES FOWARD PULLEY. MTD-9925
...
18
Key, 3/16 sq. x 1 MTD-GW-9301
...
19
SPACER-.755X.937X1.375 (on fwd pto shaft) MTD-9046
...
20
SHIM - same as above, 1/32" thick MTD-736-04192
...
21
GUIDE-BELT FWD MTD-20555
...
22
SCR-FLANGE 1/4-20X3/4 GR5 MTD-1754128
...
23
WASHER-FLAT 1/4 SAE MTD-9900
...
24
CVR-BELT W/DEC P/JR OPC (incl #33) MTD-20852
...
25
NUT-HFLK 5/16-18 ZP MTD-9848
...
26
IDLER-V-GROOVE (internal bushing type) MTD-50190
...
27
BOLT-HH 5/16-24 X 1.5 ZP MTD-9708
...
28
SCR-HH 5/16-24X.50 MTD-9563
...
29
GUIDE-BELT REV PNT (for rev idler pulley) MTD-50198
...
xx
KIT-BELT P/J (incl #20565 fwd & #9095 rev blt) MTD-11018
...
32
DECAL-STARTING STABIL MTD-20821
...
33
DECAL-BELT COVER O MTD-GW-20818
...
...
...
Processing